Band 400 Series

Thermoplast MODULAR FLAT BAND

It is the strongest of all plastic conveyor belts, has a 17% open area and a pitch of 2 "(50.8 mm).

The upper surface smooth and simple design offers a free movement. Offered with thrusters at the request of 1 "to 4" high. Articulation closed and central drive. Approximate size of the aperture 6.4mm (0.25 ") x 4.6mm (0.18")

MODULAR BANDA Thermoplast with drive and side guards

The design of our bands allows maintenance and repair processes are carried out in a short time, profitable and easy to perform.

The modules of our band, manifolded easily, without removing the entire conveyor belt, to address areas that are damaged.

MODULAR BANDA ROLEX Thermoplast

It is a product where the wheels are attached to the modules, they start to spin at a time of accumulation of products such as containers, boxes, trays, etc. It has 20% open area.

MATERIALS THAT ARE MANUFACTURED:

Polyethylene, Polypropylene, Acetal and Nylon

APPLICATIONS:

Bulk feeders, sorting lines, shipments to factory exhaust, freezing, thawing, glazing, cooling, canning lines, scrubbers, exhausters, handling of boxes, packaging, cooking tunnels, palletizer, pallet unloader and others.

PUSHED Vane:

Pushers straight / base nonstick Flush Grid modules 25mm (1 "), 51mm (2"), 76mm (3 ") and 102mm (4") high.

Each plunger protrudes from the center of the module that supports it and is molded as an integral part of the band so you do not need thrusters sujetarlos.Los Flush Grid has two sides: one is smooth (pusher rectum), while the other side has ribs vertical (stick pusher). The buckets are available with linear increments of 51mm (2 ") and can extend up to 150mm (6").

Also on offer mats in pusher type 2 "high with two smooth sides and taper at the tip 6.6 mm to 24 mm at the base.



www.bandasplasticas.com

Bandplast